Description:
Solexir Solar-5200 is a basic solution with pH around 9 to 12. This solution can remove all sub-micron particles after fabrication of solar cells.
Application:
This solution must be used after solar cells are fabricated, and thus it has no impact on electrical connections.
Process:
1- Rinse your sample with Di-water to get rid of all loose particles.
2- Expose your sample to Solar-5200 for 1 min.
3- Process temperature is the room temperature
4- Rinse once again your sample with Di-water
5- Immediately dry your sample to eliminate any possible airborne contamination.
Contact Us!
